China 0.1-0.2-0.4-0.75-1.5-2.2kw Solid Shaft Gear Motor Helical Gearbox helical bevel gearbox sew

Solution Description

 

Product Description

Primary Characteristics:
1) Made of higher high quality material,  non-rustingBoth flange and foot mounting accessible and suited for all-round installation
two) Huge output torque and high radiating performance
three)Exact grinding helical gear with Smooth managing and lower noise, no deformation,can function long time in dreadful issue
four)Nice appearance, sturdy provider existence and modest volume, compact framework
5)Both 2 and 3 stage obtainable with broad ratio variety from 5 to two hundred
6)Various output shaft diameter offered -forty-50mm
7)Modular construction enlarge ratio from 5 to 1400

Primary Resources:
one)housing with aluminium alloyand cast iron content
2)Output Shaft Substance:20CrMnTi
three)Great quality no noise bearings to maintain long support life
4)Higher efficiency oil seal to stop from oil leakage

Programs:
G3 Collection helical equipment motor are vast employed for all types of automated tools, this kind of as chip removing device, conveyor, packaging products, woodworking equipment, farming products, slurry scraper ,dryer, mixer and so on.

In depth Images

Merchandise Parameters

 

(n1=1400r/min  50hz)
norminal ratio 5 10 15 twenty 25 thirty 40 fifty 60 eighty one hundred a hundred 120 one hundred sixty   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 forty six 35 28 23 18 fourteen eleven nine 7
M2(Nm) 50hz three.two 6.5 9.eight twelve.9 16.1 19.6 25.7 31.1 37.five 49.5 sixty two.nine 76.1 a hundred.7 a hundred twenty five.four
60hz 3 five eight 11 13 seventeen 21 26 31 41 fifty two 63 eighty four 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio five ten fifteen twenty twenty five 30 forty 50 60 80 one hundred a hundred 120 one hundred sixty 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 ninety two 70 56 45 35 29 23 eighteen fourteen thirteen twelve eight 7
M2(Nm) 50hz 6.5 twelve.six 19.1 26.3 32.6 38.nine 50.4 sixty three seventy five.six one hundred.8 103.9 one hundred twenty five.four one hundred fifty 200.four 250.seven
60hz 5.4 ten.five 16.six 21.nine 27.one 32.4 forty two 52.five sixty three 84 86.6 104.5 a hundred twenty five 167 208.nine
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio five 10 15 20 25 30 40 50 60 eighty a hundred a hundred 120 one hundred sixty two hundred
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 one hundred forty four 92 seventy two 58 47 36 29 24 eighteen 14 fourteen twelve nine 7
M2(Nm) 50hz 12.9 twenty five 38.6 fifty one.4 sixty five.4 seventy eight.two one hundred.7 125.4 150 two hundred.4 206.8 250.7 301.one 400.7 461.eight
60hz ten.seven twenty.8 32.one forty two.nine fifty four.5 sixty five.2 83.nine 104.5 a hundred twenty five 167 172.three 208.9 250.nine 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 ten 15 twenty twenty five thirty 40 fifty 60 80 a hundred a hundred one hundred twenty a hundred and sixty 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 one hundred forty ninety four 69 58 46 35 29 24 18 14 14 eleven nine seven
M2(Nm) 50hz 24.6 forty eight.2 72.nine ninety seven.5 122.one one hundred forty five.seven 187.five 235.seven 282.nine 376.one 387.nine 439 527 703 764
60hz 20.5 forty.two 60.seven 81.3 201.8 121.four 156.three 196.4 235.7 313.four 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4571 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 ten fifteen twenty 25 thirty 40 50 60 eighty a hundred one hundred 120 a hundred and sixty 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 ninety three 70 fifty five 47 34 27 24 seventeen fourteen 13 12 eight seven
M2(Nm) 50hz 48.two 97.5 a hundred forty five.seven 193.9 242.one 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.two 81.three 121.four 161.six 201.eight 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 ten 15 twenty 25 30 forty fifty sixty eighty a hundred        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 ninety five sixty eight fifty four forty five 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1571 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4571 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

Define and mounting dimension:

G3FM: Three Phase Gear MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
common brake
0.1kw  Ø18 five–30-40-fifty 236 270 192.5 eleven 16.5 170 four ten 30 145 35 18 20.5 129 6 157 80 81
 Ø22 -one hundred sixty-two hundred 262 296 197.five eleven 19 185 four twelve forty 148 forty seven 22 24.5 129 six 171.five 89.five 83.five
0.2kw  Ø18 5- 267 270 192.5 eleven sixteen.five a hundred and seventy four ten 30 145 35 eighteen twenty.five 129 6 161 eighty 81
 Ø22 -80-a hundred 293 296 197.5 eleven 19 185 four twelve 40 148 forty seven 22 24.five 129 6 171.five 89.five 83.5
 Ø28 306 309.5 208.5 eleven 23.five 215 4 15 45 one hundred seventy fifty 28 31 129 8 198.five one hundred and five.5 88
0.4kw  Ø22 5- 314 324.five 204 11 19 185 four twelve forty 148 47 22 24.five 139 6 171.5 89.five 88.five
 Ø28 -eighty-a hundred 330 337.five 215 11 23.five 215 four fifteen forty five 170 fifty 28 31 139 8 198.five one zero five.five 93
 Ø32 349 357 229.five thirteen 28.five 250 four fifteen 55 180 60 32 35 139 10 234 126 ninety eight
0.75kw  Ø28 five- 350.five 343.five 227.5 eleven 23.5 215 four 15 forty five a hundred and seventy fifty 28 31 159 8 198.five one zero five.five 103
 Ø32 -eighty-a hundred 379.five 387 242 thirteen 28.5 250 four 15 fifty five a hundred and eighty 60 32 35 159 ten 234 126 108
 Ø40 401.5 408.five 270 eighteen 34 310 5 eighteen sixty five 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5- 420.five 441 254 thirteen 28.five 250 five fifteen fifty five one hundred eighty sixty 32 35 185 10 234 126 121
 Ø40 -eighty-a hundred 457.five 478 270 eighteen 34 310 five 18 65 230 seventy one 40 43 185 12 284 149 126.5
 Ø50 485.5 506 three hundred 22 40 360 5 twenty five 75 270 eighty three fifty 53.5 185 fourteen 325 173.5 132.five
2.2kw  Ø40 5- 466.5 487 270 18 34 310 five 18 sixty five 230 seventy one forty forty three 185 twelve 284 149 126.five
 Ø50 -80-a hundred 510.5 531 300 22 40 360 five 25 75 270 eighty three 50 fifty three.five 185 14 325 173.5 132.5


 

G3LM: 3 Stage Equipment MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
common brake
0.1kw  Ø18 5–30-40-50 236 270 40 a hundred and ten one hundred thirty five sixteen.five sixty five nine 45 30 18 20.five 129 183 six 133 eighty five 10
 Ø22 -one hundred sixty-200 262 296 sixty five one hundred thirty one hundred fifty five 19 ninety 11 fifty five 40 22 24.five 129 193 six 139.five 90 twelve
0.2kw  Ø18 5- 267 270 40 110 135 sixteen.5 sixty five 9 forty five 30 eighteen 20.5 129 183 six 133 85 ten
 Ø22 -80-100 293 296 sixty five 130 155 19 90 eleven 55 40 22 24.5 129 193 six 139.5 90 twelve
 Ø28 306 309.5 ninety 140 175 23.five a hundred twenty five eleven 65 forty five 28 31 129 203 eight one hundred seventy one hundred ten fifteen
0.4kw  Ø22 5- 314 324.5 sixty five one hundred thirty one hundred fifty five 19 90 11 55 40 22 24.five 139 199.5 6 141.five 90 12
 Ø28 -80-100 330 337.five ninety 140 a hundred seventy five 23.five 125 eleven sixty five forty five 28 31 139 210 8 one hundred seventy a hundred and ten 15
 Ø32 349 357 a hundred thirty a hundred and seventy 208 28.5 one hundred seventy 13 70 fifty five 32 35 139 226 ten 198 130 eighteen
0.75kw  Ø28 five- 350.five 343.five ninety a hundred and forty 175 23.five 125 11 65 45 28 31 159 222 8 a hundred and seventy a hundred and ten 15
 Ø32 -80-100 379.5 387 one hundred thirty a hundred and seventy 208 28.5 a hundred and seventy thirteen 70 55 32 35 159 238.5 10 198 130 18
 Ø40 401.five 408.five a hundred and fifty 210 254 34 196 15 90 65 forty 43 185 249 twelve 230 a hundred and fifty 20
1.5kw  Ø32 five- 420.5 441 one hundred thirty 170 208 28.5 170 thirteen 70 55 32 35 185 250.five 10 198 one hundred thirty 18
 Ø40 -80-a hundred 457.five 478 a hundred and fifty 210 254 34 196 fifteen ninety sixty five forty 43 185 260 twelve 230 one hundred fifty twenty
 Ø50 485.five 506 160 230 290 forty 210 18 a hundred seventy five 50 fifty three.5 185 288 fourteen 265 one hundred seventy twenty five
2.2kw  Ø40 5- 466.five 487 150 210 254 34 196 15 ninety sixty five forty 43 185 260 12 230 one hundred fifty 20
 Ø50 -80-a hundred 510.five 531 a hundred and sixty 230 290 40 210 eighteen one hundred 75 fifty 53.five 185 288 fourteen 265 a hundred and seventy 25


 

G3FS: IEC Gear REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
0.12kw  Ø18 5–30-forty-fifty 147 95 a hundred and fifteen 154 11 16.five four.5 a hundred and seventy a hundred and forty four ten 30 a hundred forty five 35 eighteen 11 twenty.5 twelve.8 6 four 163 80 86.five
 Ø22 -a hundred and sixty-two hundred 173 ninety five 115 164 eleven 19 4.5 185 one hundred forty 4 twelve 40 148 forty seven 22 eleven 24.5 twelve.8 6 4 171.5 89.5 89
0.18kw  Ø18 5- 147 ninety five 115 154 eleven 16.five four.five 170 140 4 ten thirty 145 35 eighteen 11 20.5 twelve.8 6 four 163 80 86.five
 Ø22 -eighty-one hundred 173 95 115 164 11 19 4.5 185 one hundred forty four 12 forty 148 47 22 eleven 24.five twelve.eight 6 4 171.five 89.5 89
 Ø28 186.5 ninety five 115 186 11 23.five four.5 215 140 4 15 45 170 fifty 28 11 31 twelve.eight eight four 198.five one hundred and five.five 93.five
0.37kw  Ø22 5- 181.five 110 a hundred thirty 164 eleven 19 4.five 185 160 4 12 forty 148 forty seven 22 14 24.five sixteen.three six 5 201 89.five 99
 Ø28 -eighty-100 198 a hundred and ten 130 186 11 23.five four.five 215 one hundred sixty four 15 45 a hundred and seventy 50 28 fourteen 31 16.3 eight 5 198.five 105.5 103.five
 Ø32 216.5 one hundred ten one hundred thirty 215 13 28.five 4.five 250 160 four fifteen fifty five a hundred and eighty sixty 32 14 35 16.three ten 5 234 126 108.5
0.75kw  Ø28 five- 206.5 130 one hundred sixty five 185 eleven 23.five 4.5 215 two hundred 4 15 45 one hundred seventy fifty 28 19 31 21.8 8 six 216.5 one hundred and five.five 123.five
 Ø32 -80-a hundred 235 one hundred thirty a hundred sixty five 215 13 28.five 4.five 250 200 4 15 fifty five one hundred eighty 60 32 19 35 21.eight 10 6 236.5 126 128.5
 Ø40 260.five one hundred thirty one hundred sixty five 270 eighteen 34 4.5 310 200 five eighteen 65 230 71 40 19 43 21.8 12 eight 284 149 134
1.5kw  Ø32 5- 252 130 a hundred sixty five 215 13 28.5 four.5 250 two hundred five fifteen 55 a hundred and eighty sixty 32 24 35 27.3 ten eight 236.5 126 128.five
 Ø40 -eighty-a hundred 293.five a hundred thirty a hundred sixty five 270 18 34 four.5 310 two hundred five eighteen 65 230 71 forty 24 forty three 27.3 twelve 8 284 149 134
 Ø50 321.five a hundred thirty one hundred sixty five three hundred 22 forty four.five 360 200 5 25 75 270 eighty three 50 24 53.five 27.three fourteen 8 323.5 173.5 140
2.2kw  Ø40 5- 290 180 215 270 18 34 five.5 310 250 5 eighteen 65 230 71 forty 28 43 31.3 twelve eight 284 149 134
 Ø50 -80-a hundred 334 a hundred and eighty 215 300 22 40 5.5 360 250 five 25 seventy five 270 83 fifty 28 53.5 31.3 14 8 323.five 173.five 140


 

G3LS: IEC Gear REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)  
Power kw output shaft ratio A B C D E F G H J K L N P S S1 T T1 W W1 X Y Y1 Z
0.12kw  Ø18 5–thirty-40-50 147 ninety five one hundred fifteen forty a hundred and ten a hundred thirty five 65 nine 16.five 45 4.five a hundred and forty 30 18 eleven 20.five twelve.8 6 four 138.5 85 10 M8
 Ø22 -one hundred sixty-two hundred 173 95 one hundred fifteen sixty five 130 154 ninety 11 19 55 4.5 140 40 22 eleven 24.five twelve.8 6 4 141 ninety twelve M8
0.18kw  Ø18 five- 147 95 a hundred and fifteen forty a hundred and ten a hundred thirty five 65 9 16.5 45 4.five one hundred forty thirty 18 eleven twenty.five 12.8 6 four 138.5 85 ten M8
 Ø22 -80-a hundred 173 ninety five a hundred and fifteen sixty five a hundred thirty 154 90 11 19 fifty five 4.five one hundred forty forty 22 eleven 24.5 12.eight six 4 141 90 twelve M8
 Ø28 186.five 95 one hundred fifteen ninety a hundred and forty a hundred seventy five one hundred twenty five eleven 23.5 65 4.five a hundred and forty forty five 28 eleven 31 twelve.8 eight four one hundred seventy one hundred ten fifteen M8
0.37kw  Ø22 5- 181.5 one hundred ten 130 65 one hundred thirty 154 90 11 19 fifty five four.5 a hundred and sixty 40 22 14 24.5 sixteen.3 6 five 151 ninety 12 M8
 Ø28 -eighty-one hundred 198 a hundred and ten 130 ninety one hundred forty 175 a hundred twenty five 11 23.5 65 four.5 one hundred sixty forty five 28 fourteen 31 16.3 eight 5 170 110 15 M8
 Ø32 216.five a hundred and ten one hundred thirty a hundred thirty a hundred and seventy 208 a hundred and seventy thirteen 28.5 70 four.five 160 55 32 fourteen 35 16.3 10 5 198 a hundred thirty eighteen M8
0.75kw  Ø28 5- 206.5 a hundred thirty 165 ninety one hundred forty one hundred seventy five a hundred twenty five eleven 23.five sixty five four.five 200 forty five 28 19 31 21.eight eight six 186.five one hundred ten fifteen M10
 Ø32 -eighty-100 235 a hundred thirty one hundred sixty five 130 one hundred seventy 208 a hundred and seventy thirteen 28.5 70 4.five 200 55 32 19 35 21.8 ten 6 201.five a hundred thirty eighteen M10
 Ø40 260.five 130 a hundred sixty five 150 210 254 196 fifteen 34 ninety four.five two hundred 65 40 19 forty three 21.8 12 8 230 150 20 M10
1.5kw  Ø32 5- 252 130 a hundred sixty five 130 170 208 170 thirteen 28.five 70 four.5 two hundred fifty five 32 24 35 27.3 10 8 201.five 130 eighteen M10
 Ø40 -eighty-one hundred 293.5 a hundred thirty 165 150 210 254 196 fifteen 34 90 four.five two hundred sixty five forty 24 43 27.three twelve eight 230 150 twenty M10
 Ø50 321.five one hundred thirty one hundred sixty five a hundred and sixty 230 290 210 18 40 100 4.five two hundred 75 50 24 fifty three.5 27.three 14 8 265 170 twenty five M10
2.2kw  Ø40 five- 290 a hundred and eighty 215 a hundred and fifty 210 254 196 fifteen 34 90 5.five 250 sixty five 40 28 43 31.3 twelve eight 230 150 twenty M12
 Ø50 -80-a hundred 334 a hundred and eighty 215 a hundred and sixty 230 290 210 18 40 one hundred 5.five 250 seventy five fifty 28 53.five 31.three fourteen 8 265 170 twenty five M12

Firm Profile

We are a professional reducer manufacturer situated in HangZhou, ZHangZhoug province.Our foremost products is  full selection of RV571-one hundred fifty worm reducers , also equipped GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer units, UDL Variators and AC Motors, G3 helical gear motor.Goods are broadly used for programs such as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-generating, building equipment, metallurgic mine, environmental defense engineering, and all varieties of computerized traces, and assembly lines.With fast supply, outstanding after-product sales service, superior creating facility, our products promote well  both at residence and overseas. We have exported our reducers to Southeast Asia, Jap Europe and the Center East and so on.Our aim is to produce and innovate on the basis of large quality, and produce a good status for reducers.

Workshop:

 

Exhibition

ZheJiang PTC Honest:

Packaging & Shipping and delivery

Following Sales Service

1.Routine maintenance Time and Guarantee:Inside of 1 calendar year soon after obtaining products.
two.Other ServiceSuch as modeling choice guide, installation guidebook, and dilemma resolution manual, etc

FAQ

1.Q:Can you make as for each buyer drawing?
A: Of course, we supply tailored provider for consumers appropriately. We can use customer’s nameplate for gearboxes.
two.Q:What is your phrases of payment ?
A: 30% deposit ahead of creation,balance T/T ahead of shipping and delivery.
3.Q:Are you a trading organization or maker?
A:We are a manufacurer with innovative tools and knowledgeable staff.
4.Q:What is actually your manufacturing ability?
A:4000-5000 PCS/Month
five.Q:Free of charge sample is available or not?
A:Indeed, we can source free sample if customer concur to pay out for the courier price
6.Q:Do you have any certification?
A:Of course, we have CE certification and SGS certificate report.

Speak to info:
Ms Lingel Pan
For any questions just truly feel free of charge ton speak to me. A lot of thanks for your type consideration to our company!

US $35-145
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal Type
Step: Two Stage- Three Stage

###

Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 46 35 28 23 18 14 11 9 7
M2(Nm) 50hz 3.2 6.5 9.8 12.9 16.1 19.6 25.7 31.1 37.5 49.5 62.9 76.1 100.7 125.4
60hz 3 5 8 11 13 17 21 26 31 41 52 63 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
M2(Nm) 50hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 47 36 29 24 18 14 14 12 9 7
M2(Nm) 50hz 12.9 25 38.6 51.4 65.4 78.2 100.7 125.4 150 200.4 206.8 250.7 301.1 400.7 461.8
60hz 10.7 20.8 32.1 42.9 54.5 65.2 83.9 104.5 125 167 172.3 208.9 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 140 94 69 58 46 35 29 24 18 14 14 11 9 7
M2(Nm) 50hz 24.6 48.2 72.9 97.5 122.1 145.7 187.5 235.7 282.9 376.1 387.9 439 527 703 764
60hz 20.5 40.2 60.7 81.3 201.8 121.4 156.3 196.4 235.7 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4020 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 93 70 55 47 34 27 24 17 14 13 12 8 7
M2(Nm) 50hz 48.2 97.5 145.7 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.2 81.3 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 30 40 50 60 80 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 68 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1029 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4020 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

###

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 157 80 81
 Ø22 60-80-100-120-160-200 262 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
0.2kw  Ø18 5-10-15-20-25 267 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 161 80 81
 Ø22 30-40-50-60-80-100 293 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
 Ø28 100-120-160-200 306 309.5 208.5 11 23.5 215 4 15 45 170 50 28 31 129 8 198.5 105.5 88
0.4kw  Ø22 5-10-15-20-25 314 324.5 204 11 19 185 4 12 40 148 47 22 24.5 139 6 171.5 89.5 88.5
 Ø28 30-40-50-60-80-100 330 337.5 215 11 23.5 215 4 15 45 170 50 28 31 139 8 198.5 105.5 93
 Ø32 100-120-160-200 349 357 229.5 13 28.5 250 4 15 55 180 60 32 35 139 10 234 126 98
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 227.5 11 23.5 215 4 15 45 170 50 28 31 159 8 198.5 105.5 103
 Ø32 30-40-50-60-80-100 379.5 387 242 13 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 100-120-160-200 401.5 408.5 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5-10-15-20-25 420.5 441 254 13 28.5 250 5 15 55 180 60 32 35 185 10 234 126 121
 Ø40 30-40-50-60-80-100 457.5 478 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 100-120-160-200 485.5 506 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 5-10-15-20-25 466.5 487 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 30-40-50-60-80-100 510.5 531 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5

###

G3LM: THREE PHASE GEAR MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 60-80-100-120-160-200 262 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
0.2kw  Ø18 5-10-15-20-25 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 30-40-50-60-80-100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
 Ø28 100-120-160-200 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15
0.4kw  Ø22 5-10-15-20-25 314 324.5 65 130 155 19 90 11 55 40 22 24.5 139 199.5 6 141.5 90 12
 Ø28 30-40-50-60-80-100 330 337.5 90 140 175 23.5 125 11 65 45 28 31 139 210 8 170 110 15
 Ø32 100-120-160-200 349 357 130 170 208 28.5 170 13 70 55 32 35 139 226 10 198 130 18
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 90 140 175 23.5 125 11 65 45 28 31 159 222 8 170 110 15
 Ø32 30-40-50-60-80-100 379.5 387 130 170 208 28.5 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 100-120-160-200 401.5 408.5 150 210 254 34 196 15 90 65 40 43 185 249 12 230 150 20
1.5kw  Ø32 5-10-15-20-25 420.5 441 130 170 208 28.5 170 13 70 55 32 35 185 250.5 10 198 130 18
 Ø40 30-40-50-60-80-100 457.5 478 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 100-120-160-200 485.5 506 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
2.2kw  Ø40 5-10-15-20-25 466.5 487 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 30-40-50-60-80-100 510.5 531 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25

###

G3FS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
0.12kw  Ø18 5-10-15-20-25-30-40-50 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 60-80-100-120-160-200 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
0.18kw  Ø18 5-10-15-20-25 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 30-40-50-60-80-100 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
 Ø28 100-120-160-200 186.5 95 115 186 11 23.5 4.5 215 140 4 15 45 170 50 28 11 31 12.8 8 4 198.5 105.5 93.5
0.37kw  Ø22 5-10-15-20-25 181.5 110 130 164 11 19 4.5 185 160 4 12 40 148 47 22 14 24.5 16.3 6 5 201 89.5 99
 Ø28 30-40-50-60-80-100 198 110 130 186 11 23.5 4.5 215 160 4 15 45 170 50 28 14 31 16.3 8 5 198.5 105.5 103.5
 Ø32 100-120-160-200 216.5 110 130 215 13 28.5 4.5 250 160 4 15 55 180 60 32 14 35 16.3 10 5 234 126 108.5
0.75kw  Ø28 5-10-15-20-25 206.5 130 165 185 11 23.5 4.5 215 200 4 15 45 170 50 28 19 31 21.8 8 6 216.5 105.5 123.5
 Ø32 30-40-50-60-80-100 235 130 165 215 13 28.5 4.5 250 200 4 15 55 180 60 32 19 35 21.8 10 6 236.5 126 128.5
 Ø40 100-120-160-200 260.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 19 43 21.8 12 8 284 149 134
1.5kw  Ø32 5-10-15-20-25 252 130 165 215 13 28.5 4.5 250 200 5 15 55 180 60 32 24 35 27.3 10 8 236.5 126 128.5
 Ø40 30-40-50-60-80-100 293.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 24 43 27.3 12 8 284 149 134
 Ø50 100-120-160-200 321.5 130 165 300 22 40 4.5 360 200 5 25 75 270 83 50 24 53.5 27.3 14 8 323.5 173.5 140
2.2kw  Ø40 5-10-15-20-25 290 180 215 270 18 34 5.5 310 250 5 18 65 230 71 40 28 43 31.3 12 8 284 149 134
 Ø50 30-40-50-60-80-100 334 180 215 300 22 40 5.5 360 250 5 25 75 270 83 50 28 53.5 31.3 14 8 323.5 173.5 140

###

G3LS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)  
Power kw output shaft ratio A B C D E F G H J K L N P S S1 T T1 W W1 X Y Y1 Z
0.12kw  Ø18 5-10-15-20-25-30-40-50 147 95 115 40 110 135 65 9 16.5 45 4.5 140 30 18 11 20.5 12.8 6 4 138.5 85 10 M8
 Ø22 60-80-100-120-160-200 173 95 115 65 130 154 90 11 19 55 4.5 140 40 22 11 24.5 12.8 6 4 141 90 12 M8
0.18kw  Ø18 5-10-15-20-25 147 95 115 40 110 135 65 9 16.5 45 4.5 140 30 18 11 20.5 12.8 6 4 138.5 85 10 M8
 Ø22 30-40-50-60-80-100 173 95 115 65 130 154 90 11 19 55 4.5 140 40 22 11 24.5 12.8 6 4 141 90 12 M8
 Ø28 100-120-160-200 186.5 95 115 90 140 175 125 11 23.5 65 4.5 140 45 28 11 31 12.8 8 4 170 110 15 M8
0.37kw  Ø22 5-10-15-20-25 181.5 110 130 65 130 154 90 11 19 55 4.5 160 40 22 14 24.5 16.3 6 5 151 90 12 M8
 Ø28 30-40-50-60-80-100 198 110 130 90 140 175 125 11 23.5 65 4.5 160 45 28 14 31 16.3 8 5 170 110 15 M8
 Ø32 100-120-160-200 216.5 110 130 130 170 208 170 13 28.5 70 4.5 160 55 32 14 35 16.3 10 5 198 130 18 M8
0.75kw  Ø28 5-10-15-20-25 206.5 130 165 90 140 175 125 11 23.5 65 4.5 200 45 28 19 31 21.8 8 6 186.5 110 15 M10
 Ø32 30-40-50-60-80-100 235 130 165 130 170 208 170 13 28.5 70 4.5 200 55 32 19 35 21.8 10 6 201.5 130 18 M10
 Ø40 100-120-160-200 260.5 130 165 150 210 254 196 15 34 90 4.5 200 65 40 19 43 21.8 12 8 230 150 20 M10
1.5kw  Ø32 5-10-15-20-25 252 130 165 130 170 208 170 13 28.5 70 4.5 200 55 32 24 35 27.3 10 8 201.5 130 18 M10
 Ø40 30-40-50-60-80-100 293.5 130 165 150 210 254 196 15 34 90 4.5 200 65 40 24 43 27.3 12 8 230 150 20 M10
 Ø50 100-120-160-200 321.5 130 165 160 230 290 210 18 40 100 4.5 200 75 50 24 53.5 27.3 14 8 265 170 25 M10
2.2kw  Ø40 5-10-15-20-25 290 180 215 150 210 254 196 15 34 90 5.5 250 65 40 28 43 31.3 12 8 230 150 20 M12
 Ø50 30-40-50-60-80-100 334 180 215 160 230 290 210 18 40 100 5.5 250 75 50 28 53.5 31.3 14 8 265 170 25 M12
US $35-145
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal Type
Step: Two Stage- Three Stage

###

Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 46 35 28 23 18 14 11 9 7
M2(Nm) 50hz 3.2 6.5 9.8 12.9 16.1 19.6 25.7 31.1 37.5 49.5 62.9 76.1 100.7 125.4
60hz 3 5 8 11 13 17 21 26 31 41 52 63 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
M2(Nm) 50hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 47 36 29 24 18 14 14 12 9 7
M2(Nm) 50hz 12.9 25 38.6 51.4 65.4 78.2 100.7 125.4 150 200.4 206.8 250.7 301.1 400.7 461.8
60hz 10.7 20.8 32.1 42.9 54.5 65.2 83.9 104.5 125 167 172.3 208.9 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 140 94 69 58 46 35 29 24 18 14 14 11 9 7
M2(Nm) 50hz 24.6 48.2 72.9 97.5 122.1 145.7 187.5 235.7 282.9 376.1 387.9 439 527 703 764
60hz 20.5 40.2 60.7 81.3 201.8 121.4 156.3 196.4 235.7 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4020 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 93 70 55 47 34 27 24 17 14 13 12 8 7
M2(Nm) 50hz 48.2 97.5 145.7 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.2 81.3 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 30 40 50 60 80 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 68 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1029 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4020 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

###

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 157 80 81
 Ø22 60-80-100-120-160-200 262 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
0.2kw  Ø18 5-10-15-20-25 267 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 161 80 81
 Ø22 30-40-50-60-80-100 293 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
 Ø28 100-120-160-200 306 309.5 208.5 11 23.5 215 4 15 45 170 50 28 31 129 8 198.5 105.5 88
0.4kw  Ø22 5-10-15-20-25 314 324.5 204 11 19 185 4 12 40 148 47 22 24.5 139 6 171.5 89.5 88.5
 Ø28 30-40-50-60-80-100 330 337.5 215 11 23.5 215 4 15 45 170 50 28 31 139 8 198.5 105.5 93
 Ø32 100-120-160-200 349 357 229.5 13 28.5 250 4 15 55 180 60 32 35 139 10 234 126 98
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 227.5 11 23.5 215 4 15 45 170 50 28 31 159 8 198.5 105.5 103
 Ø32 30-40-50-60-80-100 379.5 387 242 13 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 100-120-160-200 401.5 408.5 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5-10-15-20-25 420.5 441 254 13 28.5 250 5 15 55 180 60 32 35 185 10 234 126 121
 Ø40 30-40-50-60-80-100 457.5 478 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 100-120-160-200 485.5 506 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 5-10-15-20-25 466.5 487 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 30-40-50-60-80-100 510.5 531 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5

###

G3LM: THREE PHASE GEAR MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 60-80-100-120-160-200 262 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
0.2kw  Ø18 5-10-15-20-25 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 30-40-50-60-80-100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
 Ø28 100-120-160-200 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15
0.4kw  Ø22 5-10-15-20-25 314 324.5 65 130 155 19 90 11 55 40 22 24.5 139 199.5 6 141.5 90 12
 Ø28 30-40-50-60-80-100 330 337.5 90 140 175 23.5 125 11 65 45 28 31 139 210 8 170 110 15
 Ø32 100-120-160-200 349 357 130 170 208 28.5 170 13 70 55 32 35 139 226 10 198 130 18
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 90 140 175 23.5 125 11 65 45 28 31 159 222 8 170 110 15
 Ø32 30-40-50-60-80-100 379.5 387 130 170 208 28.5 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 100-120-160-200 401.5 408.5 150 210 254 34 196 15 90 65 40 43 185 249 12 230 150 20
1.5kw  Ø32 5-10-15-20-25 420.5 441 130 170 208 28.5 170 13 70 55 32 35 185 250.5 10 198 130 18
 Ø40 30-40-50-60-80-100 457.5 478 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 100-120-160-200 485.5 506 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
2.2kw  Ø40 5-10-15-20-25 466.5 487 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 30-40-50-60-80-100 510.5 531 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25

###

G3FS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
0.12kw  Ø18 5-10-15-20-25-30-40-50 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 60-80-100-120-160-200 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
0.18kw  Ø18 5-10-15-20-25 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 30-40-50-60-80-100 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
 Ø28 100-120-160-200 186.5 95 115 186 11 23.5 4.5 215 140 4 15 45 170 50 28 11 31 12.8 8 4 198.5 105.5 93.5
0.37kw  Ø22 5-10-15-20-25 181.5 110 130 164 11 19 4.5 185 160 4 12 40 148 47 22 14 24.5 16.3 6 5 201 89.5 99
 Ø28 30-40-50-60-80-100 198 110 130 186 11 23.5 4.5 215 160 4 15 45 170 50 28 14 31 16.3 8 5 198.5 105.5 103.5
 Ø32 100-120-160-200 216.5 110 130 215 13 28.5 4.5 250 160 4 15 55 180 60 32 14 35 16.3 10 5 234 126 108.5
0.75kw  Ø28 5-10-15-20-25 206.5 130 165 185 11 23.5 4.5 215 200 4 15 45 170 50 28 19 31 21.8 8 6 216.5 105.5 123.5
 Ø32 30-40-50-60-80-100 235 130 165 215 13 28.5 4.5 250 200 4 15 55 180 60 32 19 35 21.8 10 6 236.5 126 128.5
 Ø40 100-120-160-200 260.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 19 43 21.8 12 8 284 149 134
1.5kw  Ø32 5-10-15-20-25 252 130 165 215 13 28.5 4.5 250 200 5 15 55 180 60 32 24 35 27.3 10 8 236.5 126 128.5
 Ø40 30-40-50-60-80-100 293.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 24 43 27.3 12 8 284 149 134
 Ø50 100-120-160-200 321.5 130 165 300 22 40 4.5 360 200 5 25 75 270 83 50 24 53.5 27.3 14 8 323.5 173.5 140
2.2kw  Ø40 5-10-15-20-25 290 180 215 270 18 34 5.5 310 250 5 18 65 230 71 40 28 43 31.3 12 8 284 149 134
 Ø50 30-40-50-60-80-100 334 180 215 300 22 40 5.5 360 250 5 25 75 270 83 50 28 53.5 31.3 14 8