China supplier Rx38~Rx158 Foot Mounted Three Stage Helical Gear Motor Gearbox for Agitator with high quality

Product Description

RX38~RX158 Foot Mounted Three Stage Helical Gear Motor gearbox for Agitator

Product Description


Components:
1. Housing: Cast Iron
2. Gears: Helical Gears
3. Input Configurations:
Equipped with Electric Motors
CZPT Shaft Input
IEC or NEMA Motor Flange
4. Applicable Motors:
Single Phase AC Motor, Three Phase AC Motor
Brake Motors
Inverter Motors
Multi-speed Motors
Explosion-proof Motor
Roller Motor
5. Output Configurations:
CZPT Shaft Output

Detailed Photos

Models:
R Series (Foot-mounted): R18~R168
RS Series (Foot-mounted, CZPT Shaft Input)
RF Series (Flange-mounted): RF18~RF168
RFS Series (Flange-mounted, CZPT Shaft Input)
RX Series (1 Stage, Foot-mounted): RX38~RX158
RXS Series (1 Stage, Foot-mounted, CZPT Shaft Input)
RXF Series (1 Stage, Flange-mounted): RXF38~RXF158
RXFS Series (1 Stage, Flange-mounted, CZPT Shaft Input)
RM Series (agitator gearboxes): Specially designed for agitating applications
Features:
1. Compact structure, modular design
2. Single-stage, two-stage and three-stage sizes
3. High reduction ratio and torque density
4. Long service life
5. Can be combined with other types of gearboxes (Such as R Series, K Series, F Series, S Series, UDL Series)
Parameters:
2 Stage or 3 Stage
Installation:
Foot Mounted
Flange Mounted
Lubrication:
Oil-bath and Splash Lubrication
Cooling:
Natural Cooling
 

Product Parameters

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
R/RF18 20mm 0.18~0.75 3.83~74.84 85
R/RF28 25mm 16mm 0.18~3 3.37~135.09 130
R/RF38 25mm 16mm 0.18~3 3.41~134.82 200
R/RF48 30mm 19mm 0.18~5.5 3.83~176.88 300
R/RF58 35mm 19mm 0.18~7.5 4.39~186.89 450
R/RF68 35mm 19mm 0.18~7.5 4.29~199.81 600
R/RF78 40mm 24mm 0.18~11 5.21~195.24 820
R/RF88 50mm 28mm 0.55~22 5.36~246.54 1550
R/RF98 60mm 38mm 0.55~30 4.49~289.6 3000
R/RF108 70mm 42mm 2.2~45 5.06~245.5 4300
R/RF138 90mm 55mm 5.5~55 5.51~223.34 8000
R/RF148 110mm 55mm 11~90 5.00~163.46 13000
R/RF168 120mm 70mm 11~160 8.77~196.41 18000

1 Stage

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
RX/RXF38 20mm 16mm 0.18~1.1 1.6~3.76 20
RX/RXF58 20mm 19mm 0.18~5.5 1.3~5.5 70
RX/RXF68 25mm 19mm 0.18~7.5 1.4~6.07 135
RX/RXF78 30mm 24mm 1.1~11 1.42~5.63 215
RX/RXF88 40mm 28mm 3~22 1.39~6.44 400
RX/RXF98 50mm 38mm 5.5~30 1.42~5.82 600
RX/RXF108 60mm 42mm 7.5~45 1.44~6.65 830
RX/RXF128 75mm 55mm 7.5~90 1.56~6.47 1110
RX/RXF158 90mm 70mm 11~132 1.63~6.22 1680

Packaging & Shipping

Packaging & Delivery
Speed Reducer Worm Gearbox Packaging Details:Plastic Bags, Plywood Cases
Port:ZheJiang /HangZhou

Company Profile

1.More than 35 years experience in R&D and manufacturing, export gear motors & industrial gearboxes.
2. Standardization of the gearbox series
3. Strong design capability for large power & customized gearboxes.
4. High quality gearboxes and proven solutions provider.
5. Strict quality control process, stable quality.
6. Less than 2% of the quality complaints.
7. Modular design, short delivery time.
8. Quick response & professional services.

Customer visiting:

After Sales Service

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

1.Q:What kinds of gearbox can you produce for us?

A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you are interested in our product, welcome you contact me.
Our team will support any need you might have.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Industry
Hardness: Hardened
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Helical Gear
Step: Single-Step
Customization:
Available

|

Customized Request

helical gearbox

Using Helical Gearboxes for Speed Reduction and Speed Increase

Yes, helical gearboxes can be used for both speed reduction and speed increase in various applications. The design of helical gears allows them to transmit motion and power between non-parallel shafts while changing the rotational speed.

Speed Reduction: When the driving gear (pinion) has fewer teeth than the driven gear, the gear ratio leads to speed reduction. This is commonly used in applications where the input speed needs to be decreased while increasing the output torque. For example, helical gearboxes are often employed in conveyor systems to reduce the speed of the motor while maintaining sufficient torque to move heavy loads.

Speed Increase: Helical gearboxes can also achieve speed increase by having the driving gear (pinion) with more teeth than the driven gear. This configuration is less common but can be used to increase the output speed while sacrificing some torque. Speed increase applications are typically seen in scenarios where higher speeds are required, such as in certain types of machinery or industrial processes.

It’s important to note that while helical gearboxes can perform both speed reduction and speed increase, the specific gear ratios and configurations need to be carefully chosen to ensure efficient and reliable operation for the intended application.

helical gearbox

Software Tools for Simulating Helical Gear Behavior

Several software tools are available for simulating the behavior of helical gears under different conditions. These tools aid engineers in designing and analyzing helical gear systems for optimal performance and reliability. Some notable software tools include:

  • KISSsoft: KISSsoft is a widely used software for the design and analysis of mechanical components, including helical gears. It offers comprehensive calculations for gear geometry, load distribution, contact stresses, and more. The software assists in optimizing gear designs and predicting their behavior under various operating conditions.
  • AGMA Rating Suite: The American Gear Manufacturers Association (AGMA) offers software tools that follow AGMA standards for gear design and analysis. These tools provide accurate calculations for gear rating, efficiency, and durability under different load scenarios.
  • ANSYS Mechanical: ANSYS Mechanical is a versatile simulation software used for finite element analysis (FEA) of mechanical systems, including helical gears. It allows engineers to perform detailed stress and deformation analysis, simulate contact patterns, and assess the effects of different loads and boundary conditions.
  • Gleason CAGE: Gleason’s Computer-Aided Gear Engineering (CAGE) software specializes in gear design and optimization. It offers advanced tools for gear tooth profile generation, simulation of meshing behavior, and optimization of gear parameters.
  • MAGMA Soft: MAGMA Soft provides casting simulation software that can be used to predict the solidification behavior and mechanical properties of casted gear components, which is essential for ensuring quality and performance.
  • Siemens NX: Siemens NX software includes gear design and analysis capabilities, allowing engineers to simulate gear behavior, calculate load distribution, and optimize gear designs within a comprehensive CAD/CAE environment.

These software tools enable engineers to model and analyze helical gears in a virtual environment, helping them make informed design decisions, optimize gear geometry, and assess gear performance under different conditions. By utilizing these tools, engineers can create reliable and efficient helical gear systems for various industrial applications.

helical gearbox

Noise and Vibration Levels in Helical Gearboxes

Helical gearboxes are known for their relatively low noise and vibration levels compared to some other types of gears. However, there are still certain factors that can influence the noise and vibration levels in helical gear systems:

  • Helix Angle: The helix angle of helical gears helps to distribute the load over multiple teeth, reducing impact forces and resulting in smoother meshing. This contributes to lower noise and vibration levels.
  • Precision Manufacturing: High-precision manufacturing processes can ensure better gear tooth geometry and minimize irregularities that could lead to noise and vibration.
  • Lubrication: Proper lubrication is crucial for reducing friction and damping vibrations between gear teeth. Insufficient or improper lubrication can lead to increased noise levels.
  • Alignment: Proper alignment of gears is essential to minimize misalignment-induced noise and vibration. Misalignment can cause uneven tooth contact and lead to increased noise and vibration.
  • Load Distribution: Helical gears distribute loads over multiple teeth, which helps in reducing localized stresses and vibrations that could cause noise.
  • Material Quality: High-quality materials with good damping properties can help absorb vibrations and reduce noise transmission.
  • Operating Conditions: Factors such as operating speed, load, temperature, and gear backlash can influence noise and vibration levels.

Overall, helical gearboxes are designed to provide smoother and quieter operation compared to other gear types. However, the noise and vibration levels can still vary based on design, manufacturing quality, and operational factors. Engineers can optimize gear design and operating conditions to achieve the desired noise and vibration characteristics for specific applications.

China supplier Rx38~Rx158 Foot Mounted Three Stage Helical Gear Motor Gearbox for Agitator   with high quality China supplier Rx38~Rx158 Foot Mounted Three Stage Helical Gear Motor Gearbox for Agitator   with high quality
editor by CX 2024-04-26

Helical Gearbox

As one of the leading helical gearbox manufacturers, suppliers, and exporters of mechanical products, We offer helical gearbox and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the helical gearbox.

Recent Posts

Recent Comments

No comments to show.